DS1068-020B
11
LBT20769
2
SYSTEM BASIC MANAGEMENT
This chapter contains information for basic system management and describes how to activate and deactivate the system using
keypads and electronic and proximity keys.
IMPORTANT!
Users and keys must have been previously acquired, configured and enabled to set and unset the system
and to clear the alarms, as explained in
paragraph 5.4 Enabling and disabling.
2.1
KEYPADS CUSTOMISATION
Each keypad can be independently customised by means of some parameters which can be configured locally with authorisation
codes.
2.1.1
LCD Info
The keypad can display the following information in the home page with system active or not active:
Date and time (always visible);
Zone status (visible if configured);
Name system (visible if configured);
The display status of various icons of the system.
The viewing mode may be independently elected for each keypad in the system.
To enable the displaying of the
Synoptic
on the keypad, proceed as follows:
1.
Access the
MASTER
/
INSTALLER
/
TECH. MANAGER
menu by entering the access code. Press
to confirm;
2.
Select "
Keypad settings
" by pressing the key associated with the
or
symbol. Press
to confirm;
3.
Select "
LCD info
" by pressing the key associated with the
or
symbol. Press
to confirm;
4.
Select "
Synoptic
" by pressing the key associated with the
or
symbol. Press
to confirm;
5.
Press the key
associated with the "SYNOPTIC
” message on the display:
o
“ENABLE”
: indicates the assignment to the zone.
o
“ENABLE” : indicates the NON-assignment to the zone.
6.
Press
to confirm;
7.
Press
to return to the upper level menu.
To enable the displaying of the
Name
system
on the keypad, proceed as follows:
1.
Access the
MASTER
/
INSTALLER
/
TECH. MANAGER
menu by entering the access code. Press
to confirm;
2.
Select "
Keypad settings
" by pressing the key associated with the
or
symbol. Press
to confirm;
3.
Select "
LCD info
" by pressing the key associated with the
or
symbol. Press
to confirm;
4.
Select "
Name system
" by pressing the key associated with the
or
symbol
. Press
to confirm;
5.
Press the key
associated with the "NAME SYSTEM" message
on the display:
o
“ENABLE”
: indicates the assignment to the zone.
o
“ENABLE” : indicates the NON-assignment to the zone.
6.
Press
to confirm;
7.
Press
to return to the upper level menu.
