urmet domus 1068/005, Manual

Page: 23 / 52

DS1068-020B
23
LBT20769
Description on
System log
Visible with
code...
Event
Icon on
keypad display
Suggested actions
Delayed intrusion M
– I – T - U

A customised delayed input with at
least one active assigned zone
has been opened.
Alarm
---------------
Isolation M
– I – T - U

An input has been manually
isolated by the user.
Isolated
---------------
Jamming I

The system has detected an
interference on the radio part
Tampering
---------------
No dialogue
I

No communication with keypads,
expansions, readers, IP, GSM,
PSTN
(available only with
1068/005 control panel), radio
devices (supervision enabled).
Tampering

Check that the BUS devices,
radio devices and interfaces
on the control panel are
correctly connected.
Loss of mains
M
– I – T – U

Instantaneous and persistent loss
of mains (2 different messages in
the log).
---------------
Verify that:

The 220V mains power is
present

The control panel power
supply unit is working
Tamper I

A customised tamper input has
been opened

Some inputs of BAL or double BAL
type have been unbalanced.
Tampering

Check that the BAL or double
BAL inputs are correctly
connected with the 2.7Kohm
resistors.
Tampering in 24H
I

Check that the tamper inputs are
properly grounded with the
2.7Kohm resistor.
Tampering
---------------
Maintenance M
– I – T – U

The system sets to maintenance
mode
Tampering
---------------
First Entry/Last
Exi
I

A customised first entry/last exit
input with at least one active
assigned zone has been opened.
Alarm
---------------
Time scheduler M
– I – T – U

The activation of the system
through the time scheduler has
been postponed manually.
Time scheduler
---------------
Communicator
progr.
I

The programming of the
communicator has been changed
--------------- ---------------
Reset
I

Event generated at each restart or
reset (RESET jumper) of the
control panel
--------------- ---------------
Reset I

The system has been reset to the
factory settings.
--------------- ---------------
Fire Reset
M
– I – T – U

A customised fire reset input has
been opened
---------------
Available only with
1068/010 control panel.
Restoring I

A configuration backup has been
restored.
--------------- ---------------
Update result I

Result of FW upgrade of the
devices
---------------

Check that the arrow next to
the description is pointing
upwards (positive result). If
the arrow points down
(negative result), repeat the
system upgrade procedure.
SIM
expiration date
M
– I – T – U

The day of the set expiration date
has been reached.
---------------

Renewing or topping up your
SIM Card

Updating the expiration date
Emergency
M
– I – T – U

A customised emergency input
has been opened

The function key of the keypad,
wireless keypad or remote control
has been pressed
Alarm
---------------
Zone status M
– I – T – U

One or more zones of the system
have been activated or deactivated
--------------- ---------------