DS1067-035A
77
LBT8633
5.7.2
Timing programmer enabling
To activate the timing programmer it is necessary to enable it.
Enabling is possible only if there are programmed timed commands.
To enable the timing programmer follow the instructions below:
1. Enter on the keypad the Master code (default 111111) and press
OK
key.
2. Press
MENU
key.
3. Press
▼
key until “ENABLE” appears on the display.
4. Press
OK
key to confirm.
5. Press
▼
key until “TIMED COMMANDS” appears and confirm with
OK
key.
6. Press
▼
key to select ENABLE and confirm with
OK
key
.
7. Press
ESC
key repeatedly to exit from the menu.
If enabling is accepted, the green LED “clock” on the keypads will turn on.
5.7.3
Timing programmer disabling
The procedure to disable the timing programmer is similar to the enabling procedure, described in paragraph 5.7.2.
The only difference consists in selecting “DISABLE” at step 6.
By disabling the timing programmer any timed commands will be carried out. However timed commands are kept in
memory and will be active after the next Timing Programmer enabling.
5.8
INPUTS EXCLUSION AND INCLUSION
In particular circumstances it may be necessary to temporarily exclude an input from the system, for example to carry out
a test or because the connected detector is damaged and signals a false alarm, preventing the system arm. The
exclusion of an input can reduce the safety provided by the system.
If the input is double balancing type, its exclusion prevents both alarm and tamper. However, its opening is signalled by
the lighting of the open inputs LED of associated keypads.
Warning
: can be excluded only inputs with EXCLUDABLE parameter, enabled with the programming procedure.
5.8.1 Input
exclusion
To exclude an input follow the instructions below:
1. Enter on the keypad a user code or the Master code and press
OK
key.
2. Press
MENU
key.
3. Press
▼
key until “SETTINGS” appears on the display.
4. Press
OK
key to confirm. “INCLUDE/EXCLUDE” appears.
5. Press
OK
key. Appears the list of inputs that can be excluded.
6. Select with
▲
and
▼
keys the input to be excluded and confirm the selection with
OK
key.
7. Confirm with
OK
key.
Exclusion message will appear and also “excluded inputs” LEDs on the keypads will turn on.
8. Press
ESC
key repeatedly to exit from the menu.
UT01:MASTER
ENABLE
ENABLE
TIMED COMMANDS
TIMED COMMANDS
ENABLE
UT01:MASTER
SETTINGS
SETTINGS
INCLUDE/EXCLUDE
INCLUDE/EXCLUDE
IN01:...
IN01:...
EXCLUDE OK?
EXCLUDE
IN01:...
