![background image](http://html.mh-extra.com/html/urc/total-control-dms-av-tsp-2000/total-control-dms-av-tsp-2000_manual_1061978012.webp)
10
Version 1.612
Eventually, you will give Accelerator the information it will need to set
DMS-AV inputs
correctly when it
generates all of your Room Activity macros. Select the DMS-AV from the list
Select Devices with Inputs
. Once
selected, the Configure option will become available.
First, you need to configure the eight character on-screen labels the DMS-AV will display on the TV when an
input is selected. This setting also makes the next step easier!
Click the
Configure (A)
button. The Configure window opens. Drag the window to the side so that you can see
the list of available devices. Note that you can now see the video supported for each input.
Double-click on the
Input Name (B)
and enter a label (up to 8 characters) for that device.
Click any of the cells in the
Audio Input Assignment
column
(C)
to reassign the audio associated with each
video input.
If you would like to
stream any analog audio source
to other DMS products in the project, simply select them
in the
Stream Setting
portion of the
Input Configuration window (D)
. If needed, use the
Stream Output Level
to compensate for varying input levels.
Click on
Apply (E)
. Check the list of
Available Input
names
(F)
. If any of the inputs still has the old name, you
input more than 8 characters and the new name was rejected. Repeat until all labels are correct.
Programming DMS-AV in Accelerator
Program Menu: Step 8 DMS Setup/INPUTS/Configure
B
C
E
D
F
A