Universal Laser Systems ULTRA X6000, User Manual

Page: 50 / 83

50
E
Laser Type
If the system has multiple laser sources available for the selected
material, this drop-down menu may be used to select the laser type to
be used for the selected process.
F
Power
Adjustment
The Intelligent Materials Database determines the appropriate laser
power based on the material type, thickness, and selected laser type.
This adjustment enables fine-tuning of the power value to
accommodate deviations in material thickness or chemical formulations.
G
Laser Enable
Disable Toggle
Buttons
Enables or disables individual lasers if more than one laser source is
available for the selected laser type.
H
Gas Assist Type
Enables selection of the type of Gas Assist to be applied. Options
include Gas , Air, and None. If using Coaxial Gas Assist , or the optional
Lateral Gas Assist , either the Gas or Air option must be selected.
If Gas or Air has been selected for any process, all processes must have
one or the other selected. If no Gas Assist is desired, the Coaxial or
Lateral Gas Assist attachment must be removed, and no process can be
selected to use either Gas or Air.
I
Gas Assist Flow
Rate
Enables target flow rate adjustment for the Gas Assist source. This
option is not available when None is selected for Gas Assist.
J
Repeat Count The number of times to repeat the selected process.
K
Material
Selection
Indicates the currently selected material in the current database process.
The Pencil Button launches the Intelligent Materials Database’s Material
Selection Dialog that categorically lists all materials in the database
compatible with the current system setup.
L
Auto-focus
Toggle Button
Enables or disables the Autofocus procedure before the selected
process begins. If a single material height is used, it is often more
efficient to enable Autofocus for the first process only, then leave
subsequent processes disabled.
M
Save / Delete /
Discard
Changes
Buttons
Select one of these options to: Save the process settings, Delete the
current process and move the assigned colors to the unassigned
category, or Discard any changes and return to the System Operations
Page .