Universal Laser Systems ULTRA X6000, User Manual

Page: 48 / 83

48
Vector Settings Tab
Contains settings common to all Vector Processes set up in the Processes Tab (Database and Custom).
FEATURE DESCRIPTION
A
Processing Order
Settings
Determines the processing order of the vector graphical elements
Inner-Outer will produce.
B
Vector Acceleration
This value corresponds to the amount of acceleration the system
will undergo during processing. Higher percentages will yield faster
completion times. Lower percentages will yield higher quality
results.
C
Cornering
Specifies the amount of deviation from sharp corners allowed when
vector processing. Smaller values will be more faithful to the
original design file, while larger settings will increase throughput.
Setting even a small value can dramatically improve throughput in
some cases. Units are adjustable in the Systems Configuration Page .
D
Segment Reduction
Merges or eliminates segments of vector artwork that are smaller
than the size specified. Eliminates tiny pieces of geometry that are
below the set threshold. This is useful for control files that have
excessive detail. Higher values of this parameter will increase
throughput, lower values will be more faithful to the original design
file. Units are adjustable in the Systems Configuration Page .