TS_604_01 PowerWave PW3000/TP User Manual UK 5/1/18
23
3
Installation
3.1
Introduction
This chapter contains essential information concerning the unpacking, positioning, installing and cabling of the
PowerWave PW3000/TP UPS.
3.2
Taking receipt of the UPS
The UPS cabinet and accessories are delivered on purpose designed pallets that are easy to off load and move using a
forklift or suitable pallet jack.
The packing container protects the UPS from mechanical and environmental damage during transit. This protection is
further increased by wrapping the PowerWave PW3000/TP UPS with a plastic sheet.
Upon receiving the UPS you should carefully examine the packing container for any sign of physical damage.
Ensure that the received UPS equipment corresponds to the description indicated in the delivery note. The package
should contain:
WARNING:
All cabling operations must be supervised by an authorised electrician or other suitably
qualified person. All installation and operating procedures must be carried out in strict accordance with the
instructions contained in this manual. Uninterruptible Power Supplies Ltd will take no responsibility for any
personal injury or material damage caused by the incorrect installation, cabling or operation of this product.
WARNING:
Once the UPS equipment is installed it must be commissioned by an engineer approved by
Uninterruptible Power Supplies Ltd before it is powered-up. Uninterruptible Power Supplies Ltd will take no
responsibility for any personal injury or material damage caused by the application of electrical power to
this equipment before it has been fully commissioned.
CAUTION: Observe the following precautions when off-loading and moving the UPS:
•
Always keep the packages in an upright position.
•
Do not drop the equipment.
•
Due to the fitted high-energy batteries and heavy weight, do not stack the pallets.
CAUTION: Claims for visible shipping damage must be notified to the carrier immediately on receipt. Other
shipping damage claims must be filed immediately when found and the carrier must be informed within a
maximum of 7 days following receipt of the equipment.
If shipping damage is discovered, store all packing materials for further investigation.
1 x PowerWave PW3000/TP UPS
1 x User manual
1 x Parallel cable
1 x Parallel port cover plate
1 x power terminal jumper kit (6-hole)
2 x M5x12 HEX screw
4 x Cable glands
1 x Monitoring Software CD
