2: General Description
16
TS_604_01 PowerWave PW3000/TP User Manual UK 5/1/18
2.5.9 Control sub-menu
The Control menu allows various UPS operating features to be set.
There are two versions of the Control sub-menu depending on whether the UPS is operating as a single module
installation or is part of a parallel module system. The single module version is shown in Figure 2.14 and the multi-module
version in Figure 2.15.
To access the Control sub-menu you must highlight the Control option in the Main Menu then press the
SELECT
key for
longer than one second. This opens the Control sub-menu which allows you to scroll through the monitored parameters
using the
UP/DOWN
keys.
To modify a parameter you must:
1. Highlight the parameter in the Control sub-menu using the
UP/DOWN
keys.
2. Press the
SELECT
key for less that a second to access the available parameter values.
3. Highlight the wanted parameter value using the UP/DOWN keys then press the SELECT key for longer than one
second to select the chosen value and return to the Control sub-menu.
4. To exit the Control sub-menu either press the
UP
key for longer than one second to return to the Main Menu or press
the
ON/OFF
key for less than one second to return to the default screen.
Table 2.7, below, provides details of the available settings and the default values.
Measurements
Event Log
Control
Buzzer mute
UPS Battery test
Clear EPO Status
Reset fault state
Clear event log
Reset: no
Identification
Settings
Restore factory
settings
Buzzer mute: no
Status: battery test ok
Schedule battery test: no
Status: fault active
Rest fault: no
Total events:50
Clear event log: no
Status
<1s
Figure 2.14 Menu Navigation – Control Menu (single module installation)
