:
II
UPS725-02-02 PowerWave 1000 (4.5 - 10 kVA) User Manual UK Dated 13/03/15
3.8.2 Generating a UPS profile and data file
35
3.8.3 Setting up the basic UPS operating parameters
36
3.8.4 Output voltage calibration
36
3.8.5 Managing the UPS data file
37
4 Single Module Operating Procedures
4.1 Single module start-up procedures
38
4.1.1 Normal start-up (utility available)
38
4.1.2 Start-up on battery mode (cold start)
39
4.2 Operator control functions
40
4.2.1 Using the LCD metering function
40
4.2.2 Enable/disable the audible alarm
41
4.2.3 Battery test
41
4.3 Shutdown procedures
42
4.3.1 Normal shutdown (with mains available)
42
4.3.2 UPS shutdown when on battery
42
4.4 Manual load transfer between inverter and bypass
43
4.4.1 Transferring the load from the UPS inverter to the internal bypass
43
4.4.2 Transferring the load from the static bypass back to the UPS inverter 43
5 Parallel UPS System Operating Procedures
5.1 System start-up procedure
44
5.2 Shutdown procedure
46
5.3 Manual load transfer between inverter and bypass
46
5.3.1 Transferring the load from the UPS inverter to the internal bypass
46
5.3.2 Transferring the load from the static bypass back to the UPS inverter 47
6 Maintenance
6.1 Battery replacement
48
7 Troubleshooting
7.1 Introduction
49
7.2 Error codes
49
7.2.1 Audible alarm interpretation aids
50
7.3 Troubleshooting a fault condition
50
7.4 Troubleshooting an operational problem.
51
7.5 UPS Fault handling
51
7.5.1 UPS Overload
51
7.5.2 Output short circuit
51
7.5.3 Inverter/internal over-temperature
52
7.5.4 Inverter over-current and output voltage out of tolerance
52
8 Options
8.1 The importance of UPS management
53
8.2 WAVEMON shutdown and management software
53
8.2.1 Functional description
54
8.2.2 Licensing
54
8.3 SNMP adapters
55
8.4 AS400 (dry contact) card
55
8.5 USE (USB) card
56
8.6 R2E (second RS-232) card
56
9 Specification
