manualshive.com logo in svg

Unify OpenStage WL 3, User Manual

Share
Download
Unify OpenStage WL 3 User Manual Download Page 31

c03_WL3.fm

Description

Accessories

A31003-M2000-U107-1-7619, 1/2017
WL3 and WL3 Plus WLAN Handset, User Manual

31

    

   

  

3.2.6  Leather Casing

The leather casing is specially designed for the handset. The casing comes with 
a swivel type belt clip, and the handset is fully operational while it is placed in the 
casing.

3.2.7  Headset

A headset is recommended if the handset is frequently used and/or if the user 
wants to have both hands free. The headset comes in three versions; microphone 
integrated in the cable, or microphone on a boom, and hearing protection. It is 
also possible to use any headset with a 2.5 mm connector and configure 
parameters for the headset using the user’s headset profile.

To achieve optimal audio quality with the different headset types, it is 
recommended to select the corresponding headset profile. See 

10.8.1 Headset 

on 

page 100 for more information.

Summary of Contents for OpenStage WL 3





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands