manualshive.com logo in svg

Unify OpenStage WL 3, User Manual

Share
Download
Unify OpenStage WL 3 User Manual Download Page 28

Description

c03_WL3.fm

WLAN Handset

 A31003-M2000-U107-1-7619, 1/2017

28

WL3 and WL3 Plus WLAN Handset, User Manual

   

   

  

3.1.3.2  Menu Icons 

“Call diverted internally” icon is added to all internally diverted calls in 
the call list.
“Call diverted externally” icon is added to all externally diverted calls in 
the call list.
“Missed call” icon indicates missed calls in the status bar.

“Connected call” icon indicates an ongoing call.

“Call on hold” icon indicates a paused call.

“Call diverted internally” icon indicates that all calls are diverted to 
another internal handset.
“Call diverted externally” icon indicates that all calls are diverted to 
another external handset.
“To contacts” icon indicates a soft key function that opens the contact 
list.
“Secure call” icon indicates a secure voice connection during a call

“Non-secure call” icon indicates a not secure voice connection during 
a call
“Locked keypad” icon indicates a locked keypad.

“Locked entry” icon indicates that the contact cannot be edited or 
deleted by the user, for example, an entry in the company phonebook.
“Locked handset” icon indicates a locked handset.

“Do not disturb” icon indicates a handset that does not want to be 
disturbed.
Handset with WL3 Plus license including Personal Alarm.

Handset with WL3 Messaging license.

The “Contacts” menu contains all names/numbers in the local 
phonebook. In addition, a company phonebook with up to 1000 entries 
can be downloaded to the phone using the Device Manager. It is also 
possible to access a central phonebook

*

 from the “Contacts” menu.

The “Services” menu contains shortcuts to services such as phone 
calls, data send, and PTT calls.

The “Messaging” menu contains messages handling functions, such 
as reading and writing messages.

Summary of Contents for OpenStage WL 3





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands