Calling
c06_WL3.fm
In Call
A31003-M2000-U107-1-7619, 1/2017
54
WL3 and WL3 Plus WLAN Handset, User Manual
1. Select the call on hold using the Navigation key.
2. Press the left soft key “Retr.”.
The retrieved call is indicated with
. The call on hold is indicated with
.
6.3.5 End Call
Prerequisite: A new call has been started during the conversation, see
1. Select the call to end by using Up and Down on the Navigation key.
2. Press the right soft key “End”. The selected call ends.
3. If needed, press the left soft key “Retr.” to resume the remaining call.
6.3.6 Transfer Call
Prerequisite: There are two ongoing calls.
1. Select the call on hold using Up and Down on the Navigation key.
2. Press “More”.
3. Select “Transfer to”. The two calls are connected. “Transferred” is displayed
and the handset enters idle mode.
6.3.7 Transfer to New Call
Prerequisite: There is one ongoing call.
1. Press “More” during the call.
2. Select “Transf. to new”.
3. Press “Select”.
4. Enter the number to which the other party will be connected. It is also possible
to make a phonebook lookup
to select a contact in the local phonebook
and the company phonebook.
5. Press “OK” or
to transfer the call.
6.3.8 Conference Call
Prerequisite: A new call has been started during the conversation, see
on page 53 . Invite a call to the conference as follows:
