c08_WL3.fm
Alarm Operation
Push-button Alarm
A31003-M2000-U107-1-7619, 1/2017
WL3 and WL3 Plus WLAN Handset, User Manual
61
8 Alarm Operation
8.1 Push-button Alarm
Press the red alarm button twice within two seconds to activate the alarm. An
information text is displayed, default “Personal alarm” is displayed. The alarm is
sent to the alarm central that distributes it further. After that the handset returns
to stand-by mode. Note that you can always trigger the alarm when you are
speaking, editing your settings, or while the handset is locked.
8.2 Acoustic Location Signal
An alarm can be followed by an Acoustic Location Signal (ALS). The ALS is a
signal from the handset that sounds for a predefined period of time. Press
to
turn the ALS off.
8.3 Test Alarm
Press and hold the red alarm until the information text is displayed, default “Test
alarm” is displayed.
8.4 Man-down and No-movement Alarm
The Man-down alarm reacts if the handset is tilted (default 45°) from the vertical
for a predefined period of time (default 7 seconds). The No-movement alarm will
react if no movement is detected during a predefined period of time (default
30 seconds).
IMPORTANT: If a shared phone is used, it must be logged in to the system to be able to send
alarm. See Abschnitt 4.3.
NOTE: The following system dependent features are applicable to Unify WL3 Plus WLAN
Handset only, see the Configuration Manual, WL3 WLAN Handset and WL3 Plus WLAN
Handset.
NOTE: Applicable to WL3 Plus only.