manualshive.com logo in svg

Unify OpenStage WL 3, User Manual

Share
Download
Unify OpenStage WL 3 User Manual Download Page 60

Messaging

c07_WL3.fm

Calling while Reading a Text Message

 A31003-M2000-U107-1-7619, 1/2017

60

WL3 and WL3 Plus WLAN Handset, User Manual

   

   

  

7.2.2  Calling a Different Party

To call another party to read and review a received text message, perform the 
following steps:

1. Open the message as described in 10.4 Messaging on page 51 and press the 

"More" soft key.

2. From the pop-up menu, navigate to the "Call" menu item and press the 

"Select" soft key. The pre-dial screen is displayed. Enter the number of the 
party to be called or select a number from the handset call list or local or 
central phone books. 

3. Press the "Call" soft key and wait for the called party to reply. The message 

is replaced by the ongoing call detail. The user may now:

• Continue with the call without referring back to the received message.
• Redisplay the message and continue the call to further review and discuss 

the message. See 7.2.3 Redisplay the Message and Continue with the Call 
on page 38.

• Redisplay the message and terminate the call. See 7.2.4 Redisplay the Mes-

sage and Terminate the Call on page 38.

7.2.3  Redisplay the Message and Continue with the 
Call

1. To redisplay the message while the call is ongoing, select the "More" soft key.

2. From the pop-up menu, select "Messaging". 

3. From the Messaging menu, select "Inbox". The received message summary 

is displayed. 

4. Press the "View" soft key to display the message in full. If required, use the 

four-way navigation key to scroll up and down a long text message to reveal 
the content while reviewing and discussing the message with the called party.

7.2.4  Redisplay the Message and Terminate the Call

1. Press key 

. The call is terminated and the ongoing call summary details 

are replaced by the redisplayed text message.

Summary of Contents for OpenStage WL 3





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands