manualshive.com logo in svg

Unify OpenStage WL 3, User Manual

Share
Download
Unify OpenStage WL 3 User Manual Download Page 105

c12_WL3.fm

Advanced Functions

Device Information

A31003-M2000-U107-1-7619, 1/2017
WL3 and WL3 Plus WLAN Handset, User Manual

105

    

   

  

12  Advanced Functions

12.1  Device Information

In the Device Information menu, you can view information about the handset, 
which can be useful when contacting the system administrator to get support:

•

Software version

•

Hardware version

•

Licenses

•

WLAN information

•

Network information

•

User ID

To enter the Device Information menu, press “Menu”, select “Settings” 

 in the 

menu, and then select “Device info”.

For quick access to the Device Information menu in idle mode, press the keys 

#DI# (that is 

 #34#) (DI as in Device Information).

12.2  Administration Menu

The handset has a hidden “Admin menu” for system administrators. Refer to the 
Configuration Manual, WL3 WLAN Handset and WL3 Plus WLAN Handset.

Summary of Contents for OpenStage WL 3





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands