manualshive.com logo in svg

Unify OpenStage WL 3, User Manual

Share
Download
Unify OpenStage WL 3 User Manual Download Page 100

Menu Operation

c10_WL3.fm

Connections

 A31003-M2000-U107-1-7619, 1/2017

100

WL3 and WL3 Plus WLAN Handset, User Manual

   

   

  

1. From the Settings menu, select Alarm.

2. Select the wanted alarm(s) and press Back repeatedly. 

The corresponding icon(s) appear on the display.

Follow the same steps to deactivate the alarm(s). 

10.7.9.2  Edit Alarm Data

Information (for example a handset’s location) can be sent along with an alarm. It 
is recommended to create a shortcut for quick access to the “Edit alarm data“ 
menu, see 

10.6 Shortcuts 

on page 86.

1. Enter the menu by pressing “Menu“.

2. Select 

 in the menu.

3. Select “Alarm“.

4. Select “Edit alarm data“.

5. Enter alarm data.

6. Press “Save“.

10.8  Connections

10.8.1  Headset

To achieve optimal audio quality with the different headset types, it is 
recommended to select the corresponding headset profile. 

The default setting is microphone on a boom, that is, the audio is optimized for 
using a headset with microphone on a boom. The headset profile can be changed 
in the menu as follows:

1. Enter the menu by pressing the “Menu” soft key, or Confirmation on the 

Navigation key.

2. Select “Connections” 

. 

3. Select “Headset” with the soft-key Select or Confirmation on the Navigation 

key.

4. Select the corresponding headset profile from list, that is, “Mic on boom”, “Mic 

on cable”, “Hearing protection”, or “Customized headset profile”

1

1.Available if the headset profile has been configured in the Device Manager.

Summary of Contents for OpenStage WL 3





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands