Alarm Operation
Man-down and No-movement Alarm
Silent Alarm
The silent alarm is intended for potentially hazardous environments and for situations where
users do not want people nearby to know that an alarm has been triggered, in order to not esca-
late the situation. Silent alarms are accompanied neither by signals no other indications, giving
the possibility to send an alarm unnoticed.
If configured, the device will initiate a call giving the called party a possibility to listen in to get an
understanding of a threatening situation. For the details, refer to the
on page 43.
Silent alarm is configured by the system administrator. For the details, please refer to the Config-
uration Manual, Unify OpenScape WLAN Phone WL4.
NOTICE:
If both
ALS
and
Silent alarm
parameters are set for the handset, no
ALS will be triggered.
Man-down and No-movement Alarm
The Man-down alarm is triggered if the handset is tilted (default 45°) from the vertical plane for
a predefined period of time (default 7 s). The No-movement alarm is triggered if no movement is
detected during a predefined period of time (default 30 s).
When a Man-down, or a No-movement situation has been detected, the handset enters a warn-
ing phase (usually seven seconds long). During the warning phase, the handset alerts with:
• Beep and vibrator signals (depends on the settings)
.
• Message
Man-down warning. Cancel?
or
No-movement warning. Cancel?
.
The handset then sends the alarm, unless the alarm is cancelled. Successfully sent alarm is indi-
cated by and includes the following information:
• Beep or vibrator signals.
• Message
Man-down alarm sent
or
No-movement alarm sent
.
• The handset location is automatically sent along with the alarm, refer to the
on page 44.
If configured in the WinPDM/WSG DM, an Acoustic Location Signal (ALS) is activated after the
alarm has been sent, refer to the
on page 44.
The Man-down and No-movement alarm functions are not activated under the following condi-
tions:
• While the handset is placed in a charger.
• During calls (depending on settings), to avoid false alarms if the user tilts the handset, or is
motionless during a call.
• For a predefined period of time (default 10 min) if the Mute button is pressed during the warn-
ing phase.
Enable/Disable the Man-down and/or No-movement Alarm
1)
In the
Settings
menu, select
Alarm
.
2)
Select
Man-down
or
No-movement
, or both. Enabled functions are indicated by the
Man-
down
or/and
No-movement
icons on the display.
A31003-M2000-U109-01-7619, 29/04/2020
42
OpenScape WLAN Phone WL4, User Manual
