background image

Calling

Figure 4: PTT invitation window

Invitation Received during an Ongoing Call

If a user receives a PTT invitation during an ongoing call, the call is disconnected and the PTT

call is started automatically if the following conditions are true:
• The handset is configured to answer invitations automatically.

• The invitation has higher priority than the call priority.

• The user does not reject the invitation within 10 seconds.
When the invitation is received, a warning signal notifies the user before disconnecting the cur-

rent call in order to connect the PTT call.

NOTICE: 

 Depending on the priority of the invitation, the ongoing call might be

disconnected immediately or after 10 seconds.

If the user rejects the invitation, it is possible to re-join the PTT later. For details, refer to the 

Re-

join a PTT Call Session

 on page 29.

 Decline a PTT Invitation

Most incoming PTT session invitations can be declined, if not configured to be automatically ac-

cepted.
Press 

Close

 to reject the invitation. The handset returns to the previously shown screen. Even if

the PTT session invitation was rejected, it can be rejoined later, as long as the session remains

active. For the details, refer to the 

Re-join a PTT Call Session

 on page 29.

 Re-join a PTT Call Session

If a PTT session invitation was rejected or ignored, or if the session was disconnected, it is pos-

sible to re-join the call session by doing the following:

1)

In the 

Messaging

 menu, select 

Inbox

.

2)

Find and open the rejected PTT session invitation (indicated by the 

Message

 icon 

).

A31003-M2000-U109-01-7619, 29/04/2020

OpenScape WLAN Phone WL4, User Manual

29

Summary of Contents for OpenScape WLAN Phone WL4




















































































Reviews: