Unify HiPath 3000 Operating Instructions Manual Download Page 95

Page: 95 / 144

More functions/services

Communicating with PC applications over a
CSTA interface

If configured (consult your administrator), you can use your phone to
communicate with PC applications (CSTA =

omputer

upported

elecommunications

pplications). You send information to the application and

receive information from the application, for example, via your phone display.

Press the "Data I/O" key.

(Key programming

Page 69).

Enter the three-digit ID for the application you wish to control.

+-0

...

Use the relevant keys to communicate with the application.

Temporarily interrupting communication with the application

The phone rings. You accept the call.

The "Data I/O" key flashes: Communication with the application was
automatically interrupted.

Resuming communication with the application

Press the flashing "Data I/O" key. The LED lights up.

Ending communication with the application

Select and confirm the relevant CSTA message.

Lift the handset and replace it again.

Summary of Contents for HiPath 3000

















































































































































Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands

Unify HiPath 3000, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands