Unify HiPath 3000 Operating Instructions Manual Download Page 107

Page: 107 / 144

Making calls in the team/executive/secretary configuration

107

Picking up a call for another team member

Press the flashing DSS key or trunk key.

Lift the handset.

On-hook dialing: Speakerphone mode.

Forwarding calls on trunks

You can immediately forward internal and/or external calls to your lines to
different internal or external telephones (destinations) (external destinations are
also possible if the system is configured accordingly).

Activating call forwarding for one trunk activates the function for all trunk keys
assigned to this trunk in your group.

Open the Program/Service menu

Page 31.

Select and confirm the option shown.

If available, press the "CFW MULAP" key.

(You have programmed a key with the incomplete "CFW MULAP" function,
excluding the call forwarding type and destination

Page 69).

Press the required line key.

Enter the required trunk number.

Select and confirm the option shown.

Enter the destination number.

Confirm the option shown.

If available, press the "CFW MULAP" key. (You have stored the call forwarding
type and destination on the "CFW MULAP" key,

Page 69.)

Destinations

Forward Line: ON

1=all calls

2=external calls only

3=internal calls only

Save

Summary of Contents for HiPath 3000

















































































































































Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands

Unify HiPath 3000, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands