Unify HiPath 3000 Operating Instructions Manual Download Page 34

Page: 34 / 144

Basic functions

Accepting a call via the loudspeaker (speakerphone
mode)

Notes on using speakerphone mode

• Tell the other party that you are using speakerphone mode.
• The speakerphone works best at a low receiving volume.
• The ideal distance between the user and the telephone in speakerphone mode

is about 50 cm (approx. 20 inches).

The phone rings. The caller appears on the screen.

Pay attention to the notes on voice encryption

Page 77.

Press the key shown. The LED lights up.

Confirm the option shown.

The speakerphone function is activated.

if nec.

Adjust the call volume. Keep pressing the key until the desired volume is set.

Ending the call

Press the key shown. The LED goes out.

Press the key shown.

Accepting a call via the headset

Prerequisite:

A headset is connected.

The phone rings. The

key flashes.

Press the key shown.

if nec.

Adjust the call volume.

Answer

Make sure your headset port is set up properly

Page 124.

Summary of Contents for HiPath 3000

















































































































































Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands

Unify HiPath 3000, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands