Unify HiPath 3000 Operating Instructions Manual Download

Page: 54 / 144

Enhanced phone functions

The result is displayed

If only one name is found, it is displayed.
Confirm the option shown.

If several names are found (max. 50), the first name is displayed.

Press this key.

Select and confirm the option shown.

Pay attention to the notes on voice encryption

Page 77.

If no name is found

If your search does not yield any name corresponding to your query, you can
extend the range of the search, for example by deleting characters.

Select and confirm the option shown.

For further procedure, see above.

If too many names are found

If more than the maximum of 50 names are found corresponding to your query,
only an incomplete list of results can be displayed.

You can view these results, select any of the names or change the search
(e.g. narrow the search by entering more characters).

Confirm to view the incomplete list.

For further procedure, see above.

Narrow down the search.

Select and confirm in order to change the search.

For further procedure, see above.

Call

Scroll Next

Scroll Previous

Call

Modify search

In this case it is advisable to narrow down the search so that all
corresponding names can be displayed.

Show matches

Modify search

Summary of Contents for HiPath 3000

















































































































































Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands

Unify HiPath 3000, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands