Unify HiPath 3000 Operating Instructions Manual Download

Page: 77 / 144

Privacy/security

Voice encryption

Notes on voice encryption

Warning about an unencrypted connection

Your administrator can define in the communication system whether and how
you are notified of unencrypted calls.

Warning tone

and/or

This message appears on the display.

You will then receive a warning tone and/or a message on the display when you
accept a call, accept a consultation call or are connected to a conference and
the connection to a call partner is unencrypted.

Notice about an encrypted connection

A closed padlock icon appears next to the subscriber ID.

Notice about an unencrypted connection

An open padlock icon appears next to the subscriber ID.

Please see also the explanations on

Page 12.

Unencrypted call

23189 Coco

01:39

23133 Yves

01:63

Summary of Contents for HiPath 3000

















































































































































Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands

Unify HiPath 3000, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands