Unify HiPath 3000 Operating Instructions Manual Download

Page: 105 / 144

Making calls in the team/executive/secretary configuration

105

Placing a call on hold on a trunk key and retrieving
the held call

Prerequisite:

You are conducting a call via one of your group's trunks. The

"Hold" key has been programmed on your telephone

Page 69.

Holding

Press the "Hold" key.

if nec.

Replace the handset or press the disconnect (release) key.

Depending on the configuration (consult your administrator), this may be
necessary so other team members can also pick up the call on hold.

Retrieving the call

Press the trunk key that is flashing slowly.

Making calls on multiple lines alternately

Prerequisite:

You are conducting a call via one of your group's trunks. Another

trunk key is flashing.

Press the flashing line key. The first call party is on hold on the other trunk.

Press the trunk key that is flashing slowly. The second call party is on hold.

You can switch between lines as often as you wish. Press the trunk key flashing
slowly each time.

MULAP conference release

If configured (consult your administrator), you can program a sensor key on your
phone with the function "MULAP Privacy Release"

Page 69. The default label

is "Priv Release".

If you program this key, you do not have to use the menu to set up a conference.
Your team partner only has to press the flashing trunk key associated with your
trunk on his or her phone to immediately join the conference.

[

You are conducting a call.

Press the "Priv Release" key. The LED lights up.

Up to three team members can now join the conference.

Prerequisite:

The trunk on which you are speaking is configured on the other

phone as a trunk key.

Press the flashing line key.

Summary of Contents for HiPath 3000

















































































































































Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands

Unify HiPath 3000, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands