58
Enhanced phone functions
Assigning a station number (not for U.S.)
If this function has been configured (consult your administrator), you can
selectively assign a specific number (DID number) to your telephone before
making an external call. The assigned number then appears on the called party's
display.
N
Open the Program/Service menu
Æ
Page 31.
Select and confirm the option shown.
Confirm the option shown
1
.
j
Enter the DID number you wish to use.
j
Dial the external number.
Associated dialing/dialing aid
If this function has been configured (consult your administrator), you can use a
dialing aid to dial numbers and set up calls for your telephone.
The operating procedure depends on whether the dialing aid is connected to the
S
0
bus
or the
a/b (T/R) port.
You can also use your system telephone as a dialing aid for other telephones.
Dialing aid on the S
0
bus:
On the PC, select a destination and start dialing.
^
The speaker on your telephone is switched on. Lift the handset when the other
party answers.
Dialing aid at the a/b (T/R) port:
On the PC, select a destination and start dialing.
"Lift the handset" appears on the PC screen.
^
Lift the handset.
Dialing aid from your telephone for another telephone:
N
Open the Program/Service menu
Æ
Page 31.
Select and confirm the option shown.
j
Enter the internal station number ("Call for:").
j
Enter the number you wish to dial.
Calls
Temporary MNS
1.
”Differing display views in a HiPath 4000 environment”
Æ
Seite 128
Associated dial
