Unify HiPath 3000 Operating Instructions Manual Download

Page: 26 / 144

Getting to know the OpenStage

Idle menu

When in idle mode, press the

key on the 5-way navigator

Page 21 to display the idle menu.

You can call up various functions here. The idle menu includes selected functions from the

Service

Page 31.

The idle menu may contain the following entries:
• Caller list
• Forwarding on
• Lock phone
• DND on

• Advisory msg. on
• Ringer cutoff on
• Send message
• View sent message

• View callbacks

• Phonebook (system phonebook)
• HF answerback on
• Suppress call ID
• Waiting tone off
• DISA internal

Must be activated by the administrator.

Only appears when there are messages that the recipient has not yet viewed.

Only appears if callback requests are saved.

Summary of Contents for HiPath 3000

















































































































































Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands

Unify HiPath 3000, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000

Reviews:

Related manuals for HiPath 3000

Brands by name

Popular brands