12
General information
Intended use
The
OpenStage
phone is a desktop or wall-mounted unit designed for voice transmission and for
connection to a LAN. Any other use is regarded as unintended.
Telephone type
The identification details (exact product designation and serial number) of your telephone can be
found on the nameplate on the underside of the base unit. Specific details concerning your
communication platform can be obtained from your service technician.
Please always have this information to hand when you contact our service department regarding
faults or problems with the product.
Voice encryption
On HiPath 3000/
OpenScape Business
(from R 4),
HiPath Open Scape Office
(V1), your
OpenStage 40/40 G
supports voice encryption from software release 2 (V1 R2.xxxx). This allows
you to use your
OpenStage
to conduct calls without the risk of eavesdropping. Voice transmission
is encrypted and then decrypted again on the call partner's phone and vice versa.
If "Secure Mode" is enabled on your phone (consult your administrator) and a connection is
established to a phone that does not support voice encryption, the call is not encrypted and is thus
not secure.
Your administrator can define in your communication system whether you are notified of
unencrypted calls and how
Æ
Page 77.
Speakerphone quality and display legibility
• To ensure good speakerphone quality, the area in front of the telephone (front right) should be
kept clear.
The optimum distance is approx. 50 cm.
• Proceed as follows to optimize display legibility:
– Turn the phone and tilt the display so that you have a frontal view of the display while
eliminating light reflexes.
