UNI-T UPO2000CS Series, User Manual

Page: 54 / 94

UPO2000CS series User Manua
53
Chapter 5 Mathematical Operations
UPO2000CS series oscilloscope carries a variety of mathematical operations:

Math
：
+, -, *, and /

FFT
：
Fast Fourier Transform

Logical
：
AND, OR, NOT, and XOR

Custom Advanced Operations

Digital Filter
Press the MATH button to enter the mathematical operation menu is. The POSITION and the SCALE knobs
can be used to change the vertical position and the vertical profile of the mathematical operations. Under
maths operation the horizontal position cannot be independently adjusted, it will change automatically
according to the analog input channel signals.
5.1 Mathematical Function
Press MATH button, then press F1 to choose the type math.
Math Menu
Functions Options Descriptions
Type Math
Source 1
CH1, CH2, CH3,
CH4
Set any one of the CH1~CH4 as Math Source 1
Operator
+ Source 1 + Source 2
- Source 1 - Source 2
* Source 1 * Source 2
/ Source 1 / Source 2
Source 2
CH1
、
CH2
、
CH3
、
CH4
Set any one of the CH1~CH4 as Math Source 2
5.2 FFT
Using FFT (Fast Fourier Transform) mathematical operations, the time domain signal (YT) can be converted
into frequency domain signal. The following types of signals can be easily observed using FFT:
●
Harmonic content and distortion in measurement system
●
Performance of noise in DC power supply
●
Vibration Analysis