Ulvac RFP-N Instruction Manual Download

Page: 28 / 107

RF POWER SUPPLY and MATCHINGBOX

3. Setup

3-2. RF generator installation

Install the RF generator according to the following procedure.

Caution

The RFS-1330N, RFS-1350N, and MBX-1350N are heavy objects. When moving

them, always hold the handles and use two or more workers to lift them up and move

them. There is a risk of damage if mishandled.

Caution

The system cannot accommodate lightning surges, spike voltage, or momentary power

failures. If a lightning surge, spike voltage, or momentary power failure is input from the

power receiving facilities, the system may be damaged or malfunction. Use the system in

an environment without lightning surges, spike voltage, and momentary power failures.

Danger

In order to work safely, inform all related parties of the details of the work, confirm

the hazardous work (working in high locations, high voltage work) before starting the

work, and implement all measures to prevent danger. In order to reliably shutoff

hazardous energy, please use LOTO (lockout-tagout).

Summary of Contents for RFP-N












































































































Search results

Summary of Contents for RFP-N

Reviews:

Related manuals for RFP-N

Brands by name

Popular brands

Ulvac RFP-N, Instruction Manual

Search results

Summary of Contents for RFP-N

Reviews:

Related manuals for RFP-N

Brands by name

Popular brands