Ulvac PMB100D, Instruction Manual

Page: 76 / 119

YK11-0016-DI-002-08
49
Inverter settings can be changed by the customer list
※
3
No. Name Range No. Parameter Name Setting Range Unit Description
1 A2-01
User
Parameter １
b1-01 Frequency Reference Selection1※1 1
Terminals-Analog
input terminal
2 A2-02
User
Parameter２
C6-02 Carrier Frequency Selection
o2-04 to the
dependet
Set the carrier
frequency
3 A2-03
User
Parameter３
d1-02
Frequency Reference Selection ２
（Multi-Step Speed Reference１） ※2
40 Hz Switching S5 ON
4 A2-04
User
Parameter４
d1-03
Frequency Reference Selection ３
（Multi-Step Speed Reference２） ※2
30 Hz Switching S6 ON
5 A2-05
User
Parameter５
d1-04
Frequency Reference Selection ４
（Multi-Step Speed Reference３） ※2
0 Hz
Switching S5+S6
ON
6 A2-06
User
Parameter６
H1-04
Multi-Function Digital Input Terminal
S4 Function Selection
14 Fault Reset
7 A2-07
User
Parameter７
H1-05
Multi-Function Digital Input Terminal
S5 Function Selection
3
Multi-Step Speed
Reference １
8 A2-08
User
Parameter８
H1-06
Multi-Function Digital Input Terminal
S6 Function Selection
4
Multi-Step Speed
Reference 2
9 A2-09
User
Parameter９
H2-01
Terminal MA,MB and MC Function
Selection(relay)
000E Fault
10 A2-10
User
Parameter１０
H2-02
Terminal P1 Function Selection(open-
collector)
0 During Run
11 A2-11
User
Parameter１１
H2-03
Terminal P2 Function Selection(open-
collector)
2 Speed Agree 1
12 A2-12
User
Parameter１２
H3-09
Terminal A2 Signal Level
Selection(Sets the input signal level for
terminal A2) 2 4 to 20mA
13 A2-13
User
Parameter１３
H3-10
Terminal A2 Function Selection. Sets
the function of terminal A2
0 Frequency Bias
14 A2-14
User
Parameter１４
H3-11 Terminal A2 Gain Setting 100 ％ 20mA at 100%
15 A2-15
User
Parameter１５
H3-12 Terminal A2 Input Bias 0 ％ 4mA at 0%
16 A2-16
User
Parameter１６
H4-01
Multi-Function Analog Output Terminal
AM
102 Output Frequency
17 A2-17
User
Parameter１７
H4-02
Multi-Function Analog Output Terminal
AM Gain
100 ％ 10V at 100%
18 A2-18
User
Parameter１８
H4-03
Multi-Function Analog Output Terminal
AM Bias
0 ％ 0V at 0%
※
1: PMB100D has been set to "b1-01 = 0". When performing a main speed frequency reference analog input,
Please set to "b1-01 = 1".
PMB300,600,1200,2400D, please do not to "b1-01 = 0". It may cause malfunction.
※
2: On the performance of the pump, it can not be set to more than 60Hz.
※
3: This is a case of standard setting. If you change the settings in the customer behavior I ask you for
confirmation by the customer.
CAUTION
That can be changed constant in customers has been stored in the Favorites.
If you want to change your favorite setting, you can change in the setup mode
(STUP). For more information, please refer to the inverter instruction manual.
Other settings can not be changed by the customer.
Details of constants, please refer to the inverter instruction manual.