YK11-0016-DI-002-08
24
2.8 Motor control equipment (water-cooled type with atmospheric pressure
operating specification inverter) (optional)
Please refer to Section 5.4.
WARNING
For the operation of the controller and electrical wiring,
refer to the instruction manual for the inverter.
Troubles imputable to control by other than the standard controller
and to change of setting are not covered by this warranty.
Configuration and control wiring for the start, has been set at the
factory.
When starting the pump by remote operation, however, disconnect
the control wiring for the start-up and turn ON/OFF the mechanical
no-voltage contact to start/stop.
When you use the atmospheric actuation specification, in the
control equipment used in the PMB-D series, an appropriate setting
for each pump operation is performed. If you examine the special
use method (When changing the parameter of the control
equipment), consult with our company.
Furthermore, this pump guarantees reliability by the operation
frequency 50Hz and 60Hz.
2.9
Motor control equipment (air-cooled type with atmospheric pressure operating
specification inverter) (optional)
Please refer to Section 5.4
WARNING
For the operation of the controller and electrical wiring,
refer to the instruction manual for the inverter.
Troubles imputable to control by other than the standard controller
and to change of setting are not covered by this warranty.
Configuration and control wiring for the start, has been set at the
factory.
When starting the pump by remote operation, however, disconnect
the control wiring for the start-up and turn ON/OFF the mechanical
no-voltage contact to start/stop.
When you use the atmospheric actuation specification, in the control
equipment used in the PMB-D series, an appropriate setting for each
pump operation is performed. If you examine the special use method
(When changing the parameter of the control equipment), consult
with our company.
Furthermore, this pump guarantees reliability by the operation
frequency 50Hz and 60Hz.
Summary of Contents for PMB100D
