Ultratec SUPERPRINT 4425, Using Manual

Page: 11 / 98

S E T U P • 9
All you need to do to set up the Superprint 4425 and Large Visual
Display (LVD) is plug them in. You must plug in the Superprint 4425
AC adapter for at least 24 hours to charge the batteries. The ring flasher
will not work properly until the batteries are fully charged. After that,
leave both AC adapters plugged in all the time unless you need to use
batteries during a power outage or while traveling. (The LVD does not
have a battery and can only be used with the AC adapter.)
The best way to use the Superprint 4425 is to plug in a telephone line.
This is called direct connect. But if you cannot plug in a telephone line,
you can also make and answer calls by putting a telephone handset in the
Superprint 4425 acoustic cups.
Plugging in power, a telephone line and the LVD p. 10
About the control key p. 13
Turning on the LVD option + p. 14
Using the Large Visual Display (LVD) p. 15
About the clock + p. 15
Setting the clock + p. 15
Superprint 4425 function keys p. 16
About Auto ID p. 19
About the printer + p. 20
About the built-in help feature + p. 21 H Ctrl
3 Ctrl
9 Ctrl
T Ctrl
9 Ctrl
Ctrl
SETUP
CHAPTER
1