Ultratec SUPERPRINT 4425, Using Manual

Page: 21 / 98

About Auto ID
™
The Auto ID feature alerts a hearing person that you are calling from a
TTY. It alerts the person by sending several audible tones over the
telephone line every few seconds. Auto ID helps emergency services such
as 911 detect that you are calling by TTY. Auto ID is not the same as
Caller ID, a separate service available through your telephone service
provider that requires additional equipment.
Auto ID comes on when you turn on your Superprint 4425 and continues
until you start a conversation. If you are on-line, you will see SENDING
AUTO ID on the display every time the Superprint 4425 sends out
tones.
Auto ID will also begin sending tones whenever no one types for a few
minutes during a conversation. It continues until someone starts typing.
Turning off Auto ID +
You can turn off Auto ID by following these steps:
1.
Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2.
Press the key until you see AUTO ID (ON) on the display.
3.
Press the to change the setting to AUTO ID (OFF).
4.
Press the key to save the new setting and leave options.
Note:
When you turn off Auto ID, it stays off and will not send tones
until you turn it on again. This means that an emergency service center
such as 911 cannot use Auto ID tones to detect your TTY call.
Esc
Spacebar
Return
9 Ctrl
9 Ctrl
S E T U P • 1 9