Ultratec SUPERPRINT 4425, Using Manual

Page: 22 / 98

About the printer +
The printer is on when you turn on your Superprint 4425 for the first
time. Press the print key (
+ ) to turn off the printer. The display
says PRINTER OFF. Press the print key again to turn the printer back
on. You can turn the printer on or off at any time, including during a
call.
The printer starts a new line after 24 characters are typed. If a word is too
long to fit at the end of a line, the printer divides it with a dash. You can
also start a new line yourself by pressing the
key. Often the last line
will not be printed at the end of a conversation unless you press the
key before you turn off the machine.
Setting the print case +
The Superprint 4425 prints everything you type in lowercase (small)
letters and everything the other person types in uppercase (CAPITAL)
letters. You can change this setting so that everything is printed in
uppercase letters by following these steps:
1. Press the options key ( + ). The display says PRINT (UP/LOW)
CASE.
2. Press the to change the setting to UPPER.
3. Press the key to save the setting and leave the options.
This option stays changed until you change it again or you reset the
Superprint 4425.
Setting the print size +
Your Superprint 4425 is set to print 24 characters on each line (normal).
You can change this setting and print 19 characters (bold) or 14
characters (wide) per line. Follow these steps to change the print size:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see PRINT SIZE (NORMAL) on the
display.
3. Press the to change the setting to BOLD or WIDE.
4. Press the key to leave the options.
Esc
Spacebar
Return
9 Ctrl
9 Ctrl
Esc
Spacebar
9 Ctrl
9 Ctrl
Return
Return
3 Ctrl
3 Ctrl
2 0 • S E T U P