Ultratec SUPERPRINT 4425, Using Manual

Page: 47 / 98

4.
Press the key to clear your
auto-answer messages. Press
the
key if you decide not to
clear them.
N
Y
A U TO - A N S W E R • 4 5
Hold down the key and the key to read messages at normal speed.
Keep holding down the key but let go of the key to go faster.
Hold down the key again to return to normal speed. Hold down the
key and the key to read back through messages.
If you do not want to read messages when you turn off auto-answer, you
can do it later. Messages stay in memory until you clear them. The
Superprint 4425 will ask again if you want to read messages the next
time you turn off auto-answer.
Changing the contents of the pre-
programmed auto-answer memo
+
You can change what the pre-programmed auto-answer memo says by
following these steps:
1.
Press the memo key ( + ). You will see EDIT MEMO on the
display.
2.
Type ANSWER and press the key to tell the Superprint 4425
that you want to edit the memo named “Answer.”
3.
Press the clear key ( + ). You will see CLEAR CONTENTS Y/N
on the display.
4.
Press the key to erase the contents of the memo.
5.
Type the new message you want to send as your outgoing auto-
answer message.
6.
Press the key to save the new message.
Esc
Y
8 Ctrl
Return
6 Ctrl
6 Ctrl
Shift
Shift
Shift