Ultratec SUPERPRINT 4425, Using Manual

Page: 38 / 98

Wait for response + +
Use the wait for response feature when the other person tells you to hold.
The Superprint 4425 will flash the ring flasher when the other person
starts typing again. Follow these steps to turn on wait for response:
1.
When the other person types, “Hold please,” or something similar,
hold down the
and keys and press the key
( + + ). The display says WAITING.
2.
When you see the ring flasher flashing, the other person is typing.
Continue your conversation. The ring flasher will stop when you start
typing.
Using the relay voice announcer +
The relay voice announcer is a recording that tells a hearing person you
are answering with a TTY and that the call should go through a relay
service.
When the signal light flickers, telling you that someone is speaking
instead of typing, press
+ to turn on the relay voice announcer.
A woman’s voice repeats “Please use text telephone or dial relay.” You
will see the message on the display at the same time. The message stops
when someone starts typing.
The relay voice announcer is programmable. It will tell the caller what
number to dial if you type in your relay service’s telephone number by
following the instructions on the next page.
V Ctrl
V Ctrl
W Shift Ctrl
W Shift Ctrl
W Shift Ctrl
3 6 • A DVA N C E D C A L L I N G