Ultratec SUPERPRINT 4425 Using Manual Download Page 73

Page: 73 / 98

Changing ASCII seek time

Follow these steps to change the ASCII seek time:

Press the options key (

). You will see PRINT (UP/LOW)

CASE on the display.

Press the

key until you see ASCII SEEK TIME (3) on the

display.

Type a number to change the setting to 0 or any number between 0
and 9.

Press the

key to save the setting and leave options or press the

key to save the setting and go to the next option.

Turning off the auto-answer
relay voice announcer

Follow these steps to stop auto-answer from sending out the relay voice
announcer message:

Press the options key (

). You will see PRINT (UP/LOW)

CASE on the display.

Press the

key until you see AUTO ANSW VOICE (ON) on the

display.

Press the

to change the setting to OFF.

Press the

key to save the setting and leave options or press the

key to save the setting and go to the next option.

Return

Esc

Spacebar

Return

Ctrl

Ctrl

Return

Esc

Return

Ctrl

Ctrl

O P T I O N S • 7 1

Summary of Contents for SUPERPRINT 4425



































































































Search results

Summary of Contents for SUPERPRINT 4425

Reviews:

Related manuals for SUPERPRINT 4425

Brands by name

Popular brands

Ultratec SUPERPRINT 4425, Using Manual

Search results

Summary of Contents for SUPERPRINT 4425

Reviews:

Related manuals for SUPERPRINT 4425

Brands by name

Popular brands