Ultratec SUPERPRINT 4425, Using Manual

Page: 32 / 98

3.
The other person will see INTERRUPT on his or her display. He or
she can choose to stop typing and let you go ahead or ignore your
interruption and continue.
If you see INTERRUPT on your display while the ring flasher flashes, it
means that the other person wants to interrupt you and start typing. You
can choose to stop and let the other person go ahead or continue typing
yourself. You may also see INTERRUPT on your display even when you
are not connected in Turbo Code if the other person taps the spacebar a
few times.
Turning off Turbo Code interrupt +
You can turn off interrupt so that the other person cannot send an
interrupt to you. Turning off interrupt does not affect outgoing
interrupts. You can still send an interrupt to the other person. Follow
these steps to turn off interrupt:
1.
Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2.
Press the key until you see INTERRUPT (ON) on the display.
3.
Press the to change the setting to OFF.
4.
Press the key to save the new setting and leave options.
Esc
Spacebar
Return
9 Ctrl
9 Ctrl
3 0 • C A L L I N G