VIDEOSTUDIO HELP
Table of Contents
|
Index
Back
17
Configuring VideoStudio
Camcorders, VCRs, and VCD/DVD players are common sources of
video footage. To ensure a smooth interaction between these video
sources and your computer, make sure that the settings of VideoStudio
are configured properly depending on the capture device you are
using.
DV (IEEE 1394 capture card)
To check the setup of VideoStudio
for DV interface:
1.
Connect your camcorder to
your IEEE 1394 capture card.
2.
Insert your video tape into the
camcorder and switch it on.
Make sure it is in playback
mode (usually named
VTR
or
VCR
). Check your camcorder’s
manual for specific
instructions.
3.
Click
Capture Step
and check
if your device is displayed in
the
Options Panel
under
Source
.
Note:
When your camcorder is in
Record mode (usually named
CAMERA
or
MOVIE
), you can
still capture real-time video directly
in VideoStudio, even if there’s no
video tape inserted.
