manualshive.com logo in svg

Ulead MEDIASTUDIO PRO 8.0, User Manual

Share
Download
Ulead MEDIASTUDIO PRO 8.0 User Manual Download Page 288

288 MORE PROGRAMS

Important terms to know

Commonly used terminologies in the DVD-VR world are listed here to help you 
better understand the DVD-VR technology and make the most of DVD 
DiskRecorder.

• Program A video clip recorded by a set-top DVD recorder, captured from a 

video source, or imported from a DVD video folder. A program can also be an 
existing video file.

• Playlist A pre-defined sequence of video playback. The sequence consists of 

one or more programs or entry points. Though playlists are not a must on a 
DVD-VR disc, creating playlists are strongly recommended if you want to watch 
specific scenes immediately or watch videos in the order you want.

• Entry point (cell) A customized starting point of video playback for a program 

or playlist. A program or playlist can include multiple entry points. In DVD 
DiskRecorder, an entry point is defined by the mark-in function and the entire 
playback duration is defined from the mark-in point to the mark-out point.

Preferences

The Preferences dialog box lets you determine most of the program settings. To 
open the Preferences dialog box, click Settings and options and select 
Preferences or press [F6].

• Resume all confirmation dialog boxes Overrides the “Do not show again” 

option and makes all confirmation dialog boxes appear.

• Check Ulead Web site every __ days Specifies how frequently the program 

checks the Ulead Web site for news and updates.

• TV system Select the type of your TV system (NTSC or PAL/ SECAM).
• Working folder Enter or locate a folder for temporary files.
• Still image playback time Enter the playback duration (from 1 to 10 seconds) 

for each image in a slideshow.

• Audio playback mode Determines how the audio streams of the video are 

played.

• Audio export mode Determines how the audio streams of the video are 

exported.

• Enable DRT-DM during playback Allows support for DRT-DM (Distributed 

Real Time Defect Management) for DVD-RW discs, which marks bad sectors in 
order to prevent them from being written on and improves future writing 

Summary of Contents for MEDIASTUDIO PRO 8.0





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands