5.2 For
Audio
5.21 Connecting
Sources
Sound
should be connected
described in secs.
2.3 and 2.4, also giving consideration to the remarks found in sec. 4.
All of the
may remain connected during recording, but
the source to be recorded should be
on.
when setting
controls for maximum record level of an input source connected to the
l socket
, it is found that Record Level Controls ©
and ©
always be kept just
open in the Iowest
ränge,
check contact pin arrangement and input impedances to ascertain
whether better recording conditions might be
by connecting
the input source to the PHONO II socket
by
of a crossover
adapter
pin 1
pin 3, pin 4 with pin 5) obtainable at all
audio
Conversely, if Level Controls © and © must always be
kept at the top of the scale for an input source connected to the
PHONO II socket
, the crossover adapter may be used to connect
the input equipment to the RADIO/PHONO l socket
.
Consult your audio dealer if you are unable to find the proper arrange-
ment by yourself.
5.22
Supply
When connecting the SG 561 for the first
particular attention
should be given to the remarks found in sec. 1.4 above. Never forget to
unplug the machine from the
outlet before changing the fuse or
34
the voltage setting. The
should also be removed from the mains
outlet before cleaning the housing with a moistened
When tape
is properly loaded and the machine
been switched to a tape speed
setting, the
in the Record Level Meters should
up.
5.23 Making Record Level Test and Starting to Record
a record level test should be understood to
adjusting
the record level without tape movement before starting to record. Once
the tape has been loaded
described in sec. 1.7, the test can be pre-
pared for by pressing the Record Button ® and moving the Tape
Transport Switch ® from STOP to PAUSE.
Once these preliminaries have been completed, use Level Controls
and
(for input sources connected to the RADIO/PHONO l input
)
or Level Controls
and © (for input sources connected to the
PHONO II input
) to bring the pointer of the corresponding Level
Meter © or @ to register 0 dB at the loudest Programme passages
to be recorded.
Particular care should be taken in making
regulation, for setting
the record level too high (overloading - the pointer moves into the
red band)
to
recordings and hence to
and
Playback
setting the levels too
(under-recording - the pointer
always stays considerably
the 0 dB mark) will be reflected by
strong hiss during playback.
Turning the Tape Transport Switch from PAUSE to START sets tape
in motion and permits actual recording to begin.
Summary of Contents for sg 561 royal
Page 1: ...UHER SG561 ROYAL Betriebsanleitung Operating Instructions Instructions d emploi ...
Page 70: ...K 853 A 124 l T r A261 A 403 G J I L 1 1 3 Akustomat F411 F211 F411 W 214 ...
Page 72: ......
Page 74: ...0 91 10 So Mo Do 8 UHER WERKE MÜNCHEN 366 47019 DEF II 015 1078 R Printed in German ...
