uher sg 561 royal, Operating Instructions Manual

Page: 31 / 74

adding during mono recording (see sec. 7.1),
control to the record of the Programme going
the playback head to the record thus the strength of
the echo
Pressing the control ® will record a pulse on the control track
to trigger changing if the Mode is in either DIA-PILOT
or STEREO position and the SG 561 is set in record mode. The trigger
pulses
will control the changing of slides in an auto-
matic slide projector during subsequent playback) should not be re-
corded
the sound track for the slide show has already been re-
corded (see sec. 8).
Operating Mode Selector ©
With this the SG 561 may be set for eleven
of Operation. The corresponding track in use and the record or play-
back funtion to which the machine is set are shown by four illuminated
function indicators located just the level meters. The function
will up red to signal that on its track a recording is being
made. The function indicator Signals playback on its track by lighting
up green. In the following
the function indicators which light up
in each case are shown by the filled-in circles.
3.8 Dual Control for Treble ® and
Bass © Adjustment
Control ® (upper knob) is for adjusting treble response of both
channels jointly during playback. Control ©
knob) should be
used for adjustment of bass response during playback.
3.9 Volume Controls ®
The upper knob © regulates the playback level for the
channel of a Stereo recording. The Iower control regulates the
volume of the right channel.
3.10 RECORD Button ®
Pressing this switch sets the machine into record mode. The button
will remain depressed
if the Tape Transport Switch ® is moved
from STOP position to either the PAUSE or START position. When the
Tape Transport or Fast-Wind Switch is in PAUSE and START, the Record
Button is locked and cannot be depressed.
Record Playback
Chan.2 Chan.2
ECHO 1
2
1
MONO 2
MONO 1
STEREO
MULTIPLAY 1
MULTIPLAY 2
MONO/DIA-PILOT
STEREO/DIA-PILOT
BE
o • o o
29