UBCO 2x2 ADV Gen 5, Technical & Service Manual

Page: 20 / 159

UBCO TECHNICAL SERVICE MANUAL PAGE 20 OF 159
fied, tightening torque specifications require clean, dry threads. Components
should be at room temperature
.
3.5 USE OF CABLE TIES
Wherever used Cable Ties should be trimmed with no sharp edges. Where possi -
ble Cable Ties should be placed so that the final trimmed edge is least likely to
come into contact with the user during normal use of the Bike.
3.6 BRAKE COMPONENT HANDLING
When handling brake pads and discs ensure that the active surfaces of the com -
ponents do not come in contact with contaminants. Do not allow the brake pad
surface or portion of brake disc that comes into contact with the brake pad to
touch anything other than a clean, lint free cloth. If the brake pads or discs do
become contaminated, attempt to clean with Isopropyl alcohol and discard if
unsuccessful.
TABLE 1: STANDARD TORQUE SETTINGS
TORQUE SETTING FOR
FASTENER GRADE (NM)
FASTENER 8.8 10.9 12.9
M3 1.2 2 2.4
M4 3.0 4 5
M5 6 8.5 10
M6 10.5 15 18
M8 25 35 42
M10 50 71 85