UBCO 2x2 ADV Gen 5, Technical & Service Manual

Page: 135 / 159

UBCO TECHNICAL SERVICE MANUAL PAGE 135 OF 159
3. Using a 3mm Allen Key , remove the 4 fasteners attaching the Dash Cover to
the Bike
4. Using a 4mm Allen Key , remove the 4 fasteners attaching the Headlight
Clamp to the Bike
5. Using a 4mm Allen Key , remove the 4 fasteners attaching the Headlight to the
Headlight Clamp
REPLACE
1. Using a 4mm Allen Key Socket and Torque Wrench , tighten the 4 fasteners
attaching the Headlight to the Headlight Clamp ensuring the Headlight Cable
is threaded through the Headlight Clamp P-Clip
2. Using a 4mm Allen Socket and Torque Wrench , tighten the 4 fasteners attach -
ing the Headlight Clamp to the Bike
3. Connect the Headlamp to the Main Harness
4. Adjust the Headlamp Beam using the method outlined on Page 43
5. Using a 3mm Allen Key Socket and Torque Wrench , tighten the 4 fasteners
attaching the Dash Cover to the Bike
6. Using Cable Ties , retain the RH Cable Bundle released within the remove sta -
gen
7. Test to ensure the motion of the Handlebar is not restricted in any way by the
cable bundle.