UBCO 2x2 ADV Gen 5, Technical & Service Manual

Page: 92 / 159

UBCO TECHNICAL SERVICE MANUAL PAGE 92 OF 159
PRE-REQUISITE STEPS
Rear Wheel Removal - Page 50
Swing Arm Mud Flap Removal - Page 113
Rear Brake Caliper Removal (note the Brake Line should remain attached for this
operation) - Page 56
REMOVE
1. Using Flush Cutters , remove any Cable Ties retaining the Rear Brake Line and
Rear Motor Cable to the Swing Arm
2. Using 2 x 5mm Allen Keys , remove the 2 Barrel Nuts attaching the Rear Shock
Absorbers to the Swing Arm
3. Using a 8mm Allen Key and 17mm Socket with Breaker bar, remove the Swing
Arm fastener.
REPLACE
1. Using a 8mm Allen Key Socket with Torque Wrench and 17mm Socket with
Breaker Bar , tighten the Swing Arm fastener
2. Using a 5mm Allen Key Socket, Torque Wrench , 5mm Allen Key and Loctite 243
tighten the 2 Barrel Nuts attaching the Rear Shock Absorbers to the Swing
Arm
3. Using Cable Ties , retain the Rear Brake Line and Rear Motor Cable to the
Swing Arm