UBCO 2x2 ADV Gen 5, Technical & Service Manual

Page: 67 / 159

UBCO TECHNICAL SERVICE MANUAL PAGE 67 OF 159
3. Using Flush Cutters, remove the Cable Ties attaching the Brake Line from the
RH Cable Bundle
4. Using a 10mm Socket and Socket Driver , release and remove the U-Bolt Nuts
5. Using a T30 Torx Key , release and remove the Master Cylinder Fasteners
6. Thread the Front Brake Set through the Frame
REPLACE
1. Thread the Front Brake Set through the Frame
2. Using a T30 Torx Socket and Torque Wrench , tighten the Master Cylinder Fas -
teners
3. Using a 10mm Socket and Torque Wrench , tighten the U-Bolt Nuts
4. Using a T30 Torx Socket and Torque Wrench , tighten the Caliper Fasteners
5.
6. Using
Cable Ties , retain the Brake Line to the RH Cable Bundle
7. Ensure the movement of the Handlebar is not restricted by the Brake Set
8. Bleed the Brakes using the method outlined on Page 23