62
VEHICLE INTERIOR AND BODY EqUIPMENT
Interior heating, ventilation and conditioning
The vehicle is equipped with heating-and-ventilating unit
and climate control unit produced by Sanden. The units are
controlled by control board 5 (Fig. 3.1, 3.2).
Control panel (Fig. 3.12) is meant for maintaining of
temperature in the interior set by the driver and performs the
following functions:
- Motoreducer control of the heatr flaps;
- Ensuring the ability to operate the unit in "Manual" mode;
- Ensuring the ability to operate the unit in "AUTO" mode;
- Ensuring the ability to operate the unit in "Intensive
windscreen heating" mode;
- Ensuring the ability to operate the unit in "Interior
preheating" mode;
- Unit fan control capacity;
- Motoreducer control of the recirculation flap.
When actuating the tail lamps, all markings on the switches
of the control panel are illuminated with green light. The same
happens when the ignition is turned on or off.
Fig. 3.12. Heater control panel:
1 — rotary switch for adjusting the temperature of the air incoming to the in-
terior (in "Manual" mode) / setting of the interior air temperature (in "AUTO"
mode) with a built-in indication system; 2- rotary switch for distribution of air
currents (controls the motoreducer of the front and rear heater flaps) with a
built-in indication system; 3 — rotary switch for controlling the fan speed of the
climate control unit with a built-in indication system; 4 — interior temperature
sensor; 5 — rotary switch marker
Summary of Contents for PATRIOT
Page 183: ...Memo...
