112
up. If the diagnostic lamp is on with the engine operating, the
system and engine require maintenance as soon as possible.
When ignition faults are present while engine is operating,
the diagnostic lamp starts to blink and glows on while neutralizer
exceeds the allowed temperature.
Clearing fault codes.
The memory storing the fault codes can only be cleared using
the scanning tester.
If the rechargeable battery switches off, the control unit
self-learning parameters are not lost and can be cleared using a
scan-tester.
Pre-starting
All necessary information about heater operation and
maintenance is in the manufacturer's manual, enclosed in the
motor vehicle.
WARNING!
When using a starter heater, the minimum fuel
volume in the right fuel tank must be at least 5 liters.
ENGINE ZMZ-51432 (Fig. 9.11, 9.12)
engine suspension
During operation, check tightening of threaded joints of
the front and the rear engine suspensions and condition of the
mounts. Delamination and breakage of the engine mounts is
not permitted.
engine gas distribution mechanism
The camshafts' drive is chain-type double-stage. The first
stage is from the crankshaft to the intermediate shaft, the second
stage is from the intermediate shaft to the camshafts.
Each chain tensioning is done by hydraulic tensioners auto-
matically.
engine lubrication system
The engine should be stopped immediately when a lubrication
system malfunction is registered.
The liquid-oil heat exchanger is provided for oil cooling in
the lubrication system.
The lubrication system is filled through the oil filler placed
on the cylinder head valving cover.
Summary of Contents for PATRIOT
Page 183: ...Memo...
