114
When oil critical pressure signal device turns off, stop the
engine and check oil level in 5 minutes. Add oil as required.
Please remember, the engine contains trapped oil at all times.
Pour the oil in portions bringing oil level to the indicator to the
upper mark 'P' . The volume between 'O' and 'P' marks holds
about 1 liter of oil. Oil level above 'P' mark is not permitted.
Use recommended oil brands.
Different brands of engine oils and from different manufacturers
may
not be
mixed.
When oil of one grade is replaced with oil of another grade,
we recommend you flush the engine lubrication system. When
petroleum oil is replaced with a synthetic oil and vice versa, the
engine must be flushed.
To flush the engine lubrication system:
- drain used engine oil from the crankcase while hot;
Fig. 9.12. ZMZ-51432 engine (right-side elevation):
1 — starter; 2 — fuel rail; 3 — phase sensor; 4 — cooling fluid removal to
the heater pipe; 5 — inlet pipe; 6 — alternator; 7 — high-pressure fuel pump
(HPFP); 8 — timing sensor; 9 — fluid & oil heat exchanger; 10 — oil filter;
11 — oil pump drive cover
Summary of Contents for PATRIOT
Page 183: ...Memo...
