UAZ PATRIOT, Operation Manual

Page: 68 / 184

68
If the control panel in "Intensive windscreen heating" mode
receives a signal to switch on a conditioner, then the conditioner
will be switched on and the system will perform the drying of
the climate control unit.
"AUTO" mode is turned on by switch " "
In this mode, the control panel controls the air damper so
that it is set by the rotary switch 1 (Fig. 3.12), temperature
is automatically maintained if the fan rotation speed of the
climate control unit is manually set (by rotary switch 3) and
the distribution of the air currents is manually operated (rotary
switch 2).
The air temperature automatically maintained in the motor
vehicle interior can vary from +16 to +28°C. Moreover, the
values indicated in the table 3.1 are also available.
If "AUTO" mode is switched on and the position of rotary
switch 1 is changed, then the interior air temperature is set in
accordance with the new value.
Switching off "AUTO" mode occurs after pressing the
"AUTO" switch a second time or after switching on the "Intensive
windscreen heating" mode.
Position of
switch 1
1 2 3 4 5 6 7 8 9
Temperature,
16 18 20 21 22 23 24 26 28
°C(±2°C)
Table 3.1.
"Interior preheating"+ mode.
The control panel goes to "Interior preheating" mode if the
source of power is the liquid heater.
When this mode is turned on (the ignition is turned off),
the control board indicates this mode with orange blinking
illumination on rotary switch 2 with a 4.5 second blinking
period (1.5 seconds turned on/ 3 seconds turned off).
If the position of rotary switch 3 exceeds position 4 of the
switch, then the control panel limits the maximum rotation
speed of the fan and rotary switch 3 goes to the 4th position in
order to prevent forced accumulator battery discharge.